Table of Contents
Advertisement
No response
when any
buttons pressed,
Play fails to start or
stops soon after
starting.
No response
when
remote control buttons
pressed,
Cannot add markers,
There are already
markers,
• Some discs prohibit certain operations.
• If there is no response at all, the unit may have been affected by
lightning or static electricity. Turn the unit off and on again. Alternatively.
turn the unit off disconnect
the power source (AC or battery pack),
reconnect
the power and turn the unit on again.
• Condensation
has formed: Wait 1 to 2 hours for it to evaporate.
• This unit cannot play discs other than those specified. (5)
• Clean the disc. (33)
• Ensure the disc is inserted correctly. (8)
• Check that the disc has something
recorded on it.
• Check that the batteries are installed correctly. (7)
• The batteries are depleted:
Replace it with new ones. (7)
• Point the remote control at the remote control sensor and operate. (7)
• You cannot add markers while playing a playlist or discs that do not
show the elapsed time.
• The unit reads and displays the markers added with a DVD video
recorder.
There is a lot of noise,
No sound from the
unit's speaker.
No sound from other
speakers.
Cannot play multi
channel surround
sound
Distorted
sound.
Piercing
noise comes
from the speakers.
Sound effects
do not
work.
Cannot record to digital
recording
equipment.
(Incorrect
sound
recorded.)
FM transmitter
does not
work.
• Move unit away from mobile phones.
• Noise may occur when playing WMA files.
• The speaker is off if the LCD is closed or headphones
are connected.
eTurn up the volume. (8)
• Check all connections
and settings. (21), (23)
• Output is in stereo (PCM) if you have changed the play speed.
• This unit plays DVD-Audio in 2 channels.
• Turn Advanced
Surround off if this occurs. (12)
• If you have connected
a digital amplifier which does not include a
decoder, be sure to select "PCM" in "Dolby Digital" or "DTS Digital
Surround"
in "Audio". (21)
• Dialogue enhancer and Advanced
Surround
do not work when the unit
is outputting
bitstream
signals. (21)
• Advanced
Surround does not work if you have changed the play speed.
(1 O)
• Some audio effects do not work or have less effect with some discs.
• You cannot record WMA/MP3.
• You cannot record DVDs that have protection
preventing digital
recording.
• You cannot record DVDs if the recording equipment
cannot handle
signals with a sampling frequency
of 48 kHz.
• Make the following settings:
-Advanced
Surround;
Off (12)
- PCM Digital Output:
Up to 48 kHz (21)
-Dolby
Digital/DTS
Digital Surround:
PCM (21)
• FM transmitter
does not work when the audio/video
cable or
headphones
are connected.
"0
'5
0
0
0
RQT7682
Advertisement
Table of Contents
