Sony Handycam DCR-DVD101E Operating Instructions Manual page 93

Connecting your camcorder to your computer - Introduction
Install the ImageMixer Ver.l.5 for Sony DVD
Handycam (hereinafter referred to as
ImageMixer) software that manages movies
and still images transferred from your
camcorder on your computer, and the
WINASPI software that manages writing data
on CD-Rs/CD-RWs.
When the USB driver installation is
completed, click [hnageMixer] on the
inenu window.
Install Wizard program starts up and
the [Choose Setup Language[ window
appears.
If the menu window does not appear,
double-click [My Computer], then
[ImageMixer] (CD-ROM Drive). The
menu window appears after a while.
2
Select the language to be used_ and click
[OK].
3
Follow the instructions given in the on-
screen messages. When the [Setup Type]
window appears, make sure that [PAL]
is selected and continue the procedure.
The [InstallShield Wizard Complete]
dialog box appears.
4
Click [Finish[.
The installation of ImageMixer is
completed. The installation dialog box
of WINASPI appears.
5 Click [OK], and follow the instructions
given in the on-screen messages.
6 When The [InstallShield Wizard
Complete] dialog box appears, click
[Finish[.
7 Take out the CD-ROM from the CD-
ROM drive after the computer restarts.
Note
On a computer without DirectX 8.0a or later,
Direct)( installation starts. Follow the
instructions given in the on-screen messages
and restart the computer after the installation
is complete.
About WINASPI
To be able to use the ImageMixer CD writing
function, you need to install WINASPI. If a
different writing application was previously
installed, its writing function mav not work
correctly. If that happens, reinstall the original
application and replace WINASPI. Note that
the hnageMixer CD writing function may not
work properly.
Q,.
N"
-n"
8
3-
o
8
3
t_
6
<
o
<
o
m
o
m
93