Craftsman 358.360170 Parts List page 7

KNOW YOUR S AW
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CHAIN SAW. Compare the illustrations with your unit to familiarize yourself with
the location of the various controts and adjustments. Save this manua_ for future
reference.
Chain Front Hand Guard "_'_ J Front Handle
Adjustment Toot
(Bar Tool) Starter Rope
Chain
Muffler
ON/STOP
Switch
Primer
Bulb
Bar Oil Fill Cap
Cy}inder Cover
Fast Idle
Housing Fuel Mix FiII Cap
Throttte Chain
Lockout Direction
Rear of Travel
Handle
Throttle Choke A
Trigger Knob Chain Chain Nuts
Brake Catcher
ON/STOP SWITCH
The ON/STOP SWITCH is used to stop
the engine.
THRO"FrLE TRIGGER
The THROTTLE TRIGGER controIs engine
speed.
THRO'_LE LOCKOUT
The THROTTLE LOCKOUT must be
pressed before you can squeeze the
throttle trigger. This feature prevents you
from accidentally squeezing the trigger.
FAST IDLE LOCK
The FAST IDLE LOCK holds the throttle
trigger in the starting position. Activate
the fast idle lock by pressing the throttle
lockout and squeezing the throttle trig-
ger. With the throttle trigger squeezed,
press the fast idle lock. Release the
throttle lockout and trigger while holding
the fast idle lock button.
Sprocket
Hole
CHOKE KNOB
The CHOKE KNOB activates the choke to
provide additional fuel to the engine dur-
ing cotd starting.
PRIMER BULB
The PRIMER BULB circulates fuel to the
carburetor to provide quicker starting.
CHAIN BRAKE
The CHAIN BRAKE is a device designed
to stop the chain if kickback occurs.
The chain brake activates automaticaIly
in the event of kickback. The chain
brake activates manually if the front
hand guard is pushed forward. The
chain brake is disengaged by pulling the
front hand guard back toward the front
handle as far as possible.
CHAIN TENSION
tt is norma_ for a new chain to stretch
during first 15 minutes of operation. You
should check your chain tension fre-
quently. See CHAIN TENSION under the
SERVICE AND ADJUSTMENTS section.