Download Print this page
Craftsman 917.28749 Operator's Manual

Craftsman 917.28749 Operator's Manual

26.0 hp, 54" mower electric start 6 speed transaxle garden tractor

Advertisement

Available languages

Available languages

Quick Links

Operator's
Manual
(RRFTSMRN°
'1'1
GAR
26.0 HR*
TRACTO
54" Mower
Electric Start
6 Speed Transaxle
Model No.
917.28749
• Espahol,
p. 34
This product has a low emission
engine
which
operates
differently
from
previously
built
engines.
Before
start the
you
engine,
read and understand
this Owner's
Manual.
IMPORTANT:
Read and follow all Safety
Rules and Instructions
before
operating
this equipment,
For answers to your questions
about this product, Call:
t -800-659-59 t 7
Sears
Craftsman
Help
Line
5 am - 5 pm, Mon-
Sat
SEARS,
ROEBUCK
AND CO., HOFFMAN
ESTATES,
IL 60179
U.S.A.
Visit our Craftsman
website:www.sears.com/craftsman
*As rated
by the engine
manufacturer

Advertisement

loading

Summary of Contents for Craftsman 917.28749

  • Page 1 -800-659-59 t 7 Rules and Instructions before Sears Craftsman Help Line operating this equipment, 5 am - 5 pm, Mon- SEARS, ROEBUCK AND CO., HOFFMAN ESTATES, IL 60179 U.S.A. Visit our Craftsman website:www.sears.com/craftsman *As rated by the engine manufacturer...
  • Page 2: Limited Warranty

    ..........Assembly/Pre-Operation ....... Troubleshooting ........Operation ..........Sears Service ......Back Cover Maintenance Schedule ......CRAFTSMAN LIMITED WARRANTY TWO YEARS ON TRACTOR When operated and maintained according to all supplied instructions, if this tractor fails due to a defect in material...
  • Page 3 _I, DANGER: This cutting machine is capable of amputating hands and feet and throwing objects. Failure to observe the following safety instructions could result in serious injury or death. Never direct discharged material toward ,_WARNING: In order to prevent anyone. Avoid discharging material...
  • Page 4 II. SLOPE OPERATION Never carry children, even with the blades shut off. They may fall off and Slopes are a major factor related to loss of be seriously injured or interfere with control and tip-over accidents, which safe machine operation. Children result in severe...
  • Page 5 Check their proper operation regularly. • Remove gas-powered equipment from • Keep machine free of grass, leaves, the truck or trailer and refuel it on the other debris build-up. Clean oil or fuel ground. If this is not possible, then refuel spillage and remove...
  • Page 6 Forward: Ground Speed 1 st 1.58 Congratulations on making a smart pur- (MPH): 1.14 chase. Your new Craftsman® product 1.77 designed and manufactured for years of 2.65 dependable operation. But like all products, 3.38 it may require repair from time to time. That's 4.33...
  • Page 7 Mower Front Wheel (1) Wheel (_ (1) Locknut 3/8-16 (1) 1-1/40.D. Washer Mower ront Link (5) Large Retainer Springs - 7/16 sembly (1) 3/40.D. Washers (1) Anti-Swar (2) Small Retainer Springs - 5/16 (2) Rear Lift Link Assemblies (5) 1-3/16 O.D.
  • Page 8 Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED ASSEMBLY A socket wrench set will make assembly easier. Standard wrench sizes you need are listed below. (1) 3/4" wrench Pliers (1) 9/16"...
  • Page 9 Remove key from bag and start the Remove plastic tie securing belt, bring engine (see "TO START ENGINE" belt forward and check belt for proper the Operation section of this manual). routing in all mower pulley grooves. After engine has started, move throttle control to idle position.
  • Page 10 ATTACH MOWER SIDE SUSPENSION 10.Turn steering wheel to position wheels straight forward. ARMS (A) TO CHASSIS - Position hole in arm over pin (B) on outside of tractor 11 .ATTACH FRONT LINK (E) - Work from chassis and secure with washer left side of tractor.
  • Page 11 ,/CHECKLIST Before you operate your new tractor, wish to assure that you receive the best performance and satisfaction from this Quality Product. Please review the following checklist: v" All assembly instructions have been completed. v" No remaining loose parts in carton. v"...
  • Page 12 These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. I'.,I REVERSE NEUTRAL HIGH CHOKE FAST SLOW IGNITION SWITCH ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT MOWER LiFT OPERATION SYSTEM...
  • Page 13 KNOW YOUR TRACTOR READ THIS OWNER'S MANUAL SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations various controls and adjustments. Save this manual for future reference. 3117 Our tractors conform to the applicable safety standards of the...
  • Page 14 The operation of any tractor result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision...
  • Page 15 Put attachment lift lever in desired cut- TO USE THROTTLE CONTROL ting height slot. Always operate engine at full speed (fast). Slide pointer tab (T) to desired cutting Operating engine at less than full speed height as a reminder for next time you (fast) reduces engine's operating...
  • Page 16 TO OPERATE MOWER Look down and behind before backing. Move gear shift lever to reverse (R) po- Your tractor is equipped with an operator sition and slowly release clutch/brake presence sensing switch. Any attempt pedal to start movement. by the operator to leave the seat with the When use of the ROS is no longer...
  • Page 17 SERVICE REMINDER/HOUR METER CAUTION: Alcohol blended fuels (called Service reminder shows the total number gasohol or using ethanol or methanol) attract moisture which leads to separa- of hours the engine has run and flashes tion and formation of acids during storage.
  • Page 18 MOWING TiPS COLD WEATHER STARTING (50 ° F and below) • Tire chains cannot be used when When engine starts, slowly push mower housing is attached to tractor. choke control in until the engine Mower should be properly leveled begins to run smoothly.
  • Page 19 MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE SCHEDULE EACH SEASON STORAGE HOURS HOURS HOURS HOURS Check Brake Operation Check Tire Pressure F_ Check Operator Presence & ROS Systems Check for Loose Fasteners C ChecWReplace Mower Blades T Lubrication Chart 0 Check Battery Level R Clean Battery and Terminals Check Transaxle...
  • Page 20 TRACTOR CHECK REVERSE OPERATION (ROS) SYSTEM Always observe safety rules when per- , When the engine is running with the forming any maintenance. BRAKE OPERATION ignition switch in the engine "ON" posi- tion and the attachment clutch engaged, If tractor requires more than five (5) feet to any attempt...
  • Page 21: Oil Filter

    TO CHANGE ENGINE NOTE: The original equipment battery your tractor is maintenance free. Do not Determine temperature range expected attempt to open or remove caps or covers. before oil change. All oil must meet API Adding or checking level of electrolyte service classification SG-SL.
  • Page 22: Spark Plugs

    AIR FILTER CLEAN AIR SCREEN Your engine will not run properly using Air screen must be kept free of dirt and dirty air filter. Clean the foam pre-cleaner chaff to prevent engine damage from after every 25 hours of operation or every overheating.
  • Page 23 CLEANING We do not recommend using a garden hose or pressure washer to clean your • Clean engine, battery, seat, finish, etc. tractor unless the engine and transmis- of all foreign matter. sion are covered to keep water out. Water Keep finished surfaces and wheels...
  • Page 24 From right side of mower, disconnect Test your adjustment by mowing some uncut grass and visually checking anti-sway bar (S) from right rear mower bracket (D) - remove retainer spring appearance. Readjust, if necessary, and washer and pull mower toward until you are satisfied with the results.
  • Page 25 TO REPLACE MOWER DRIVE BELT With an 11/16" or adjustable wrench, loosen jam nut A several turns to clear MOWER DRIVE BELT REMOVAL adjustment nut B. Park tractor on a level surface. Engage With a 3/4" or adjustable wrench, turn parking brake.
  • Page 26 TO REPLACE MOTION DRIVE BELT TO CHECK BRAKE Park the tractor on level surface. Engage If tractor requires more than five (5) feet to parking brake. For assistance, there is a stop at highest speed in highest gear on a belt installation guide decal...
  • Page 27 TO START ENGINE WITH A WEAK Install new battery with terminals BATTERY same position as old battery. First connect RED battery cable (B) to _f_,WARNING: Lead-acid batteries positive (+) battery terminal with hex generate explosive gases. Keep sparks, bolt and keps nut as shown. Tighten flame and smoking...
  • Page 28 TO REMOVE HOOD GRILL ENGINE SEMBLY Maintenance, repair, or replacement Raise hood. the emission control devices and systems, which are being done at the customers Unsnap headlight wire connector. pense, may be performed by any non-road Stand in front of tractor. Grasp hood at engine...
  • Page 29: Engine Oil

    ENGINE ENGINE FUEL SYSTEM Drain oil (with engine warm) and replace with clean engine oil. (See "ENGINE" iMPORTANT: It is important to prevent the Maintenance section of this manual). gum deposits from forming in essential CYLINDER(S) fuel system parts such as carburetor, fuel Remove spark...
  • Page 30 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION Hard to start Dirty air filter. Clean/replace air filter. Bad spark plug. Replace spark plug. Weak or dead battery. Recharge or replace battery. Dirty fuel filter. Replace fuel filter.
  • Page 31 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center CAUSE PROBLEM CORRECTION Spark plug wire loose. Connect and tighten spark plug wire. Dirty engine air screen/fins. Clean engine air screen/fins. Dirty/clogged muffler. Clean/replace muffler. Loose or damaged wiring.
  • Page 32 TROUBLESHOOTING CHART: See appropriate section in manual unless directed to Sears service center PROBLEM CAUSE CORRECTION Clean underside of mower Buildup of grass, leaves and trash under mower. housing. Mower drive belt worn. Replace mower drive belt. Blades improperly installed. Reinstall blades sharp edge down.
  • Page 33: Suggested Guide For Sighting Slopes For Safe Operation

    SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 15 DEGREES MAX. down the face of slopes, never across the face. Do not mow ARNING: To avoid serious injury, operate your tractor up and slopes greater than 15 degrees.
  • Page 34 ..........Ingles del DueSo Programa de Mantenimiento ....... GARANTiA MMITADA DE CRAFTSMAN DOS ANOS PARA TRACTORES Si opera y mantiene este tractor segQn todas las instrucciones provistas, y este deja de funcionar debido a defectos del material o de la mano de obra dentro de los dos ahos posteriores...
  • Page 35 IMPORTANTE: Esta Maquina cortadora es capaz de amputar las manosy los pies y de lanzar objetos, si no se observan las instrucciones de seguridad siguientes se pueden producir lesiones graves o la muerte. _a_DVERTENClA: Siempre desconecte • No hacer funcionar la m@.quina sin el alambre de la bujia y p6ngalo donde no pueda captador de hierba entera, la protecci6n...
  • Page 36 • Escoger una velocidad de marcha baja de Nunca permitir que niflos u otras personas modo que no sea necesario pararse o cam- esten dentro del equipo por remolcar. biar estando en una pendiente. • En pendientes, el peso del equipo remolcado No cortar la hierba mojada.
  • Page 37 • Las cuchillas del cortac@sped son afiladas. • Mantener la m@.quina libre de hierba, hojas Envolver la cuchilta, ponerse guantes y porter u otros residuos acumulados. Limpiar las la m@.ximaatenci6n cuando se hacen opera- salpicaduras de aceite o carburante y quitar clones en elias.
  • Page 38 REPARACI6N Velocidad de Marcha Hacia Adelante: Congratulaciones por su buena compra. 1.58 Recarrido(MPH): Su nuevo producto Craftsman<._ est& diseflado 2 '_d 1.14 y fabricado para funcionar de modo fiable por 3 r_ 1.77 muchos aflos. Pero como todos los productos, 2.65...
  • Page 39 Rueda delantera de la segadore (1) Rueda (1) Tuerca de Seguridad 3/8-16 (1) 1-1/40.D. Arandela Segadora (1_) (5) Resorte de Retencidn scilacidn (1) 3/40.D. Arandela 1) Montaje de la pieza (2) Resorte de Retenci6n de uni6n deantera (2) Rear Lift Link Assemblies (5) 1-3/16 O.D.
  • Page 40 Su tractor nuevo ha sido montado en la f&brica con la excepci6n de aquellas partes que no se han montado por razones de envio. Cuando en este manual se mencionan terminos "mano derecha" o "mane izquierda" se refiere a cuando usted se encuentra en la posici6n de operaci6n (sentado/a detr&s del volante de direcci6n).
  • Page 41 (lento). 7. Aliviarel pedaldelembrague/freno a la posici6n "FRENO" y . Moverla palanca de cambio al primerengranaje. 8. Aliviarlentamente elpedaldelembrague/ frenoy guiarlentamente eltractorfuerade la plataforma. 9. Actuarsobreelfrenoparaparareltractor, colocar el frenodemanoy la palanca de control e n la posici6n neutra. 10.Girarla Ilavede encendido en la posici6n "STOP".
  • Page 42 6. FIJELOSBRAZOS DESUSPENSION Haga girarelvolante paraquelasruedas LATERALES D ELA CORTADORA ( A) quedenbienderechas. FIJELAPIEZA DEUNION ANTERIOR (E) AL CHASlS - Ubique el orificiodelbrazo - Trabaje porelladoizquierdo deltractor. encima de laclavija(B)quehayenla parte Introduzca e lextremo dela barradela pieza exterior d elchasisdeltractor, y fijelocon de uni6nporelorificio anterior d ela barrade unaarandela y unresortedecontenci6n.
  • Page 43 ,/LISTA DE REVtSI6N 14. Instale la correa pas&ndola por encima de la polea del embrague del motor (M). Antes de operar y de disfrutar de su trac- tor nuevo, le deseamos que reciba el mejor rendimiento y la mayor satisfaccion de este producto de calidad.
  • Page 44 Estos simbolos pueden aparecer sobre su tractor o en la literatura proporcionada con el producto. Aprenda y comprenda sus significados. ESTRAN, GU- RAPIDO LENTO MARCHA ATRAS NEUTRO ALTO BAJO LACION MOTOR FRENO DE ALTURADE LA LEVANTAMIENTO MOTOR MOTOR APAGADO SlSTEMA ESTACIONAMIENTO SEGADORA DE LA SEGADORA...
  • Page 45 FAMILIARtCESE CON SU TRACTOR LEA ESTE MANUAL DEL DUENO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. Guarde este manual para referencia en el futuro. 3117 Nuestros tractores cumplen con los est&ndares de seguridad del American...
  • Page 46 La operaci6n de cualquier tractor puede hacer que salten objetos extraflos dentro de sus ojos, Io que puede producir daflos graves en estos. Siempre use anteojos SEGURIDAD de seguridad o protecciones para los ojos mientras opere su tractor o cuando haga ajustes o reparaciones.
  • Page 47 PARA USAR EL CONTROL La gama de la altura de corte es de aproxima- ESTRANGULACI6N damente 1 a 4 pulgadas. Las alturas se miden desde el suelo a la punta de la cuchitla cuando Use el control de estrangulaci6n cuando este el motor no est&...
  • Page 48 PARA OPERAR LA SEGADORA Mover la palanca del cambio en la Su tractor viene equipada con un interruptor posici6n atr&s (R) y soltar despacio el sensor que exige la presencia del operador. Si pedal del embrague/freno para empezar el movimiento. el motor est&...
  • Page 49 PRECAUCI6N: Combustibles mezclados con MECA,NISMO DE AVISO DE SERVICIO CRONOMETRO alcohol (conocidos como gasohol, o el uso de El mecanismo de aviso de servicio muestra el etanol o metanol) pueden atraer la humedad, la que conduce a la separaci6n y formaci6n nQmero total de horas que ha estado en funcio- &cidos durante el almacenamiento.
  • Page 50 ARRANQUE CON TIEMPO TEMPLADO (50 ° CONSEJOS PARA SEGAR Y MAS) • No se pueden usar las cadenas para las Cuando arranque el motor, empuje el con- Ilantas cuando la caja de la segadora est& trol de la estrangulaci6n hasta que el motor adjunta al tractor.
  • Page 51: Antes De Cada Uso

    PROGRAMA DE ANTES DE CADA CADA CADA CADA CADA ALMACENAMIENTO TEMPORADA MANTEN|MIENTO CADA USO HORAS HORAS HORAS HORAS Revisar la operaci<m del freno Revisar ia presi6n de las Ilantas V@rifi@zla commande de pr@sence F_ d'op6rateur et le sistema d ROS v"...
  • Page 52 VERtFIEZ SISTEMA FUNCIONAMIENTO TRACTOR ATRAS (ROS) Siempre observe las reglas de seguridad cu- ando de mantenimiento. • Cuando el motor est& en marcha con el in- OPERAOION DEL FRENO terruptor de Ilave en posici6n de motor "ON" y el embrague del accesorio conectado, cual- Si el tractor necesita m&s de cinco (5) pies quier tentativa del operador de viajar marcha para detenerse a la m&xima velocidad al...
  • Page 53 PARA LIMPIAR LA BATER[A Y LOS TERMI- NALES Quite el casquillo amarillo de la parte inferior de la v@.lvula de desagOe e instale el La corrosi6n y la mugre de la baterfa y de tubo de desagOe sobre la guarnici6n. los terminales pueden producir "escapes"...
  • Page 54 FILTRO DE AIRE LIMPIEZA DE LA ENTRADA DE AIRE/AREAS Su motor no va a funcionar en forma adecuada DE ENFRIAMENTO si usa un filtro sucio. Limpie el elemento del Para asegurar un enfriamiento adecuado, prefiltro de espuma despues de cada 25 horas asegL_rese que la rejilla del cesped, las aletas de enfriamiento, y otras superficies...
  • Page 55 _l_ ADVERTENClA:PARA EVITAR LESIONES SERIAS, ANTES DE DAR CUALQUIER SER- VlClO O DE HACER AJUSTES: Presione el pedal del embrague/freno completamente y aplique el freno de estacionamiento. Ponga la palanca de cambios en la posici6n de neutro (N). Ponga el embrague del accesorio en la posici6n desenganchado (DISENGAGED).
  • Page 56 PARA NIVELAR LA SEGADORA A ambos lados de la cortadora, ubique la cuchilla hacia un lade y mida la distancia AsegQrese de que los neum&ticos esten infla- (A) que hay entre el borde inferior de la dos a la PSi que se indica en estos. Si est&n cuchilla y el suelo.
  • Page 57 PARA REEMPLAZAR LA CORREA DE TRANSMISION DE LA CUCHILLA DE LA SEGADORA DESMONTAJE DE LA CORREA DE TRANS- MISION DE LA SEGADORA Estacione et tractor en una superficie nive- lada. Ponga el freno de mano. Baje la palanca elevadora a la posici6n de m&s abajo.
  • Page 58 PARA REEMPLAZAR LACORREADETRANS- MISION DE LA FUERZA ELECTROMOTRIZ. Estacione el tractor en una superficie nivelada. Ponga el freno de mano. Si necesita asistencia, del lado de abajo del apoyapies izquierdo una guia pr&ctica para el montaje de la correa. DESMONTAJE DE LA CORREA Desmonte la cortadora (Ver"PARA DESMONTAR...
  • Page 59 CONTROLAR Y AJUSTAR EL FRENO PARA HACER ARRANCAR EL MOTOR CON UNA BATERiA BAJA Si el tractor exige m&s de cinco (5) pies para _ADVERTENClA: Las baterias de &cido-plo- pararse a una velocidad m&s alta en el cambio mo generan gases explosivos. Mantenga las m&s alto en una superficie nivelada de hor-...
  • Page 60 REEMPLAZAR LA BATERIA PARA CAMBIAR EL FUSIBLE C&mbielo per un fusible tipo enchufable de 30 _IADVERTENClA: No haga cortocircuito amps, tipo automotriz. El sujetador del fusible los terminales de la bateria al permitir que una est& ubicado detr&s del tablero. Ilave de tuerca o cualquier otro objeto entre en contacto con ambos terminales a la misma...
  • Page 61 Inmediatamente prepare su tractor para el que conduce a la separaci6n y a la formaci6n de acudos durante elalmacenamiento. almacenamiento al final de la temporada o si el gasolina acidica puede daflar el sistema de tractor no se va a usar por 30 dias o m&s. combustible de un motor durante el periodo de _ADVERTENOIA:...
  • Page 62 IDENTIFICACI6N DE PROBLEMAS: Vea la secci6n apropiada en el manual a menos que eet6 dirigido a un centro de eervicio Seare. PROBLEMA CAUSA CORRECCION 1. Sin combustible. arranca 1. Llene el estanque de combustible. 2. Motor sin la 2. Yea "PARA ARRANCAR MOTOR"...
  • Page 63 IDENTIFICACI6N DE PROBLEMAS: Yea la secci6n apropiada en el manual a menoe que eet6 dirigido a un centro de eervicio Sears. CORRECCJ6N PROBLEMA CAUSA P6rdida de fuerza 3. Acumulaci6n de cesped, hojas y 3. Limpie la parte inferior de la caja (continuado) basura debajo de la segadora.
  • Page 64 IDENTIFICACI6N DE PROBLEMAS: Yea la secci6n apropiada en el manual a menoe que eet6 dirigido a un centro de eervicio Sears. PROBLEMA CAUSA CORRECCION Lae cuchillas 1. Obstrucci6n en el mecanismo 1. Remueva la obstrucci6n. eegadorae no rotan del embrague. 2.
  • Page 67 GUIA SUGERIDA PARA MEDIR LAS PENDIENTES CON LA VISTA PARA UNA OPERACION SEGURA SOLAMENTE ANDE CUESTA ARRIBA O CUESTA ABAJO Y NO ATRAVlESE EL CERRO 15 GRADOS MAX. ADVERTENCIA: Para evitar dahos graves, haga funcionar su tractor arriba y abajo de las pendientes, nunca transversalmente con respecto alas p.endientes.
  • Page 68 _ou 1,1fA_d t:}_ea__swe_ a__d managemyhemeocom o- fo_' free! mote Find this and at{ your other product manuats ontine. Get answers from our team of home experts, Get a personatized maintenance ptan for your home. o Find information and toots to hetp with home projects, b_ought by Sea_ ..