Jenn-Air Expressions CVEX4100 Series Use And Care Manual page 8

To _nstai| Gri|i
1. Before installing grill components, be certain surface controls are OFF°
2. Place the grill liner pan into an empty basin pan with the opening next to the terminal
block. The grill Jiner pan must be used since it supports the grill element.
3o Position the grill element with the terminaJ plug towards the terminal receptacle.
SJide the eJement towards the receptacJe until the terminal plug is completely
engaged. The griJt eUement should rest flat on the side ledges of the grill Jiner pan.
4. Place the black grill grates on the top of the basin pan.
Not÷ Mode! CVEX4370: The right hand cooking bay accepts cooktop cartridges and
griddHe onJy.
To Remove Grii|
1. Remove grill components once they are cool. Be sure controt switches are in the
OFF position.
2o To remove grill element, lift the side at the ventiJation chamber untiJ the top of the
eJement is about 1/2inch above the cooktop. (Note: Lifting the eJement too high while
stilJ engaged in the receptacle could damage the terminaJ plug.) To disengage
terminal, slide away from the terminal receptacJe. Lift out when fully
URptugge&
GH_I Covers
1o Grill covers can be used to cover the grill, when not in use, or an empty basin pan.
2. To remove the grill covers, push down on front or rear side. The opposite side will
lift stightly for easy removal
8