Electrical Connection - Kenmore 29502 Use & Care Manual

Allow 5inches ofspace between the back a nd sides ofthe freezer, which a llows the
proper aircirculation tocool the compressor and condensen
Locate the freezer away f rom direct sunlight and sources ofheat ( stove, heater,
radiator, etc.). Direct sunlight may a ffect the acrylic c oating and heat sources
may i ncrease electrical consumption. Extreme cold ambient temperatures may
also cause the freezer not toperform properly.
Avoid locating the freezer inmoist areas. Too much moisture inthe airwill c ause frost to
form quickly onthe evaporator requiring more frequent defrosting ofthe freezer.
Plug the freezer into anexclusive properly installed, grounded wall o utlet. Do not u nder
any circumstances cut o rremove the third (ground) prong from the power cord.
Any questions concerning power and orgrounding should bedirected toward a
certified electrician.
Electrical Connection
WARNING
Improper useof the grounded plug can result in the riskof electrical shock. If the
power cord is damaged_ have it replaced by an authorized service center.
[his freezer should be properly grounded for your safety. [he power cord of this freezer
is equipped with a three prong plug which mates with standard three prong wall outlets to
minimize the possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power
cord supplied.
Never use an extension cord to connect power to the unit.
Never use a two prong grounding adapten
Where a two prong wall receptacle is encountered, contact a qualified electrician to
have it replaced with a 3 prong receptacle in accordance with applicable electrical codes.
This freezer requires a standard 115/120 Volts A.C. -i60Hz electrical outlet with three
prong ground.
The cord should be secured behind the freezer and not left exposed or dangling to
prevent accidental injury.
6