Replacing The Light Bulbs; Stainless Steel - GE Profile Spacemaker JVM1490 Owner's Manual

www.GEApplianceAcom
Stainless Steel
Do not use a steel-wool pad; it will scratch
the surface.
To clean stainless steel surfaces, use a hot,
damp cloth with a mild detergent suitable
for stainless steel surfaces. Use a clean, hot,
damp cloth to remove soap. Dry with a dry,
clean cloth.
If food soil remains, try a general kitchen
cleaner, such as Fantastik, _ Simple Green*,
or Formula 409.*
For hard-to-clean soil, use a standard
stainless-steel cleaner, such as Bon-Ami ®
or Cameo.*
Apply cleaner with a damp sponge. Use a
clean, hot, damp cloth to remove cleaner.
Dry with a dry, clean cloth. Always scnth
lightly in the direction of the gram.
After cleaning, use a stainless-steel polish,
such as Stainless Steel Magic,eRevere Copper
and Stainless Steel Cleaner%r Wenol All
Purpose Metal Polish.* Follow the product
instructions for cleaning the stainless-steel
surface.
Replacing the light bulb.
Removescrew
Ceoktap Ught/Nite Ught
Replace with a 20 wag (reaL) halogen bulb.
Order WB36X10176fromyour GEsupplier.
F_To replace the cooktop light/nite light,
first disconnect the power at the main
fuse or circuit breaker panel, or pull
the plug.
_'_ Remove the screw from the side of the
light compartment cover and lower the
cover until it stops.
]_]Be sure the bulb is cool before
removing. Break the adhesive seal
by gently unscrewing the bulb.
I_ Screw in the new bulb, then raise the
light cover and replace the screw.
Connect electrical power to the oven.
27