Replacing The Light Bulbs; Stainless Steel - GE Profile Spacemaker JVM1490 Owner's Manual

Replacing the light bulb.
Remove screw.

Stainless Steel

Do not use a steel-wool pad; it will scratch
the surface.
To clean stainless steel surfaces, use a hot,
damp cloth with a mild detergent suitable
for stainless steel surfaces. Use a clean, hot,
damp cloth to remove soap. Dry with a dry,
clean cloth.
If food soil remains, try a general
kitchen cleaner.
For hard-to-clean soil, use a standard
stainless-steel cleaner, such as Bon-Ami
or Cameo. ®
Cooktop Light/Nite Light
Replace with a 120 volt, 20 watt (max.) halogen
bulb. Order WB36X10213 from your GE supplier.
To replace the cooktop light/nite light,
1
first disconnect the power at the main
fuse or circuit breaker panel, or pull
the plug.
2 Remove the screw from the side of the
light compartment cover and lower the
cover until it stops.
Apply cleaner with a damp sponge. Use a
clean, hot, damp cloth to remove cleaner.
Dry with a dry, clean cloth. Always scrub
lightly in the direction of the grain.
After cleaning, use a stainless-steel polish,
such as Stainless Steel Magic,
Copper and Stainless Steel Cleaner,
Wenol All Purpose Metal Polish.
the product instructions for cleaning the
stainless-steel surface.
®
3 Be sure the bulb is cool before
removing. Break the adhesive seal
by gently unscrewing the bulb.
4 Screw in the new bulb, then raise the
light cover and replace the screw.
Connect electrical power to the oven.
www.GEAppliances.com
® Revere
® or
® Follow
27