Channel Label Setup; Input Labe - Zenith Z42PX2D Installation And Operating Manual

Operation
- Choose preset labels for your channels.
- If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a channel -
even if you didn't preset a label for the channel.
1. Press the MENU button and then use A /_' button to select the $_UP menu.
2. Press the _ button and then use A / _' button to select Cha#_el Label.
3. Press the _ button. You will now see a screen filled with Labels and a preview screen.
4. Use the CR A/_' button to select a channel to Label.
5. Use A / _r / _1 / _- button to select the appropriate label for the channel, then press ENTER button to set the Label to
the selected channel.
- If you press ENTER button in TV viewing mode, you will see the channel banner. * For example:
- Change the picture source so you can watch your TV, cable TV, VCR, DVD, or any other devices that are connected to your TM
1. Press the MENU button and then use A / _' button to select the $_'_UP menu.
2. Press the _" button and then use A / _' button to select Input $ou_ree.
3. Press the _ button and then use A / _' button to select the source: Antenna
Cable, Video, Front Video, Component!, Component2, RGB-DTV (or RGB-PC),
HDMI/DVl.
4. Press EXIT button to return to TV viewing or press MENU button to return to the
previous menu.
Note:
• To toggle RGB-DTV and RGB-PC, select RGB-DTV(or RGB-PC) and press
button.
- Sets a label to each input source or lets you skip the input source which is not
in use when you press TV/WDEO button.
1. Press the MENU button and then use A / _' button to select the $_£UP menu.
2. Press the _ button and then use A / _' button to select Input _bel.
3. Press the _ button and then use A / T button to select the source: Video, Front
Video, Component1, Component2, RGB, HDMi/DVL
4. Press the _ / _ button to select the label.
5. Press EXmTbutton to return to TV viewing or press MENU button to return to the
previous menu.
206-4022 Owner's Manual 25