Operation Turning The Tv On; On-Screen Menus Language Selection - Zenith Z42PX2D Installation And Operating Manual

Operation
* in this manuam, the OSD (On Screen Display) may be different from your TV's because it is just an
example to he_p you with the TV operation.
1. First, connect power cord correctly. At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the O/, TV/VmDEO ®, OR (_. / _') button on the TV or press the POWER,
TV INPUT, TV/VIDEO, OR (_k / T), Number (0 ~ 9) button on the remote control.
2. Select the viewing source by using TV/VmDEO button on the remote control
This TV is programmed to remember which power state it was last set to, even if the power cord is out.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
Notes;
• If you intend to be away on vacation, disconnect the power plug from the wall power outlet.
, Without CableCARDT'_': illuminates red in standby mode, lfluminates green when the TV is turned on.
, inserting the CableCARDT'_': lfluminates orange in standby mode, lfluminates green when the TV is turned on.
TV
i
The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use _. / _' button to select the OPTION
menu.
2. Press the I_ button and then use _. / T button to select T.anguage.
3. Press the _ button and then use A / _' button to select your desired language.
From this point on, the on-screen menus will be shown in the selected lan-
guage.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
22 Plasma TV 206-4022