Saving And Re-Using Scanning Settings - Epson 600 User Manual

Advanced Scanning
Note:
This procedure does not
save custom tone curve
settings. Refer to
Re-use Tone Curve
Settings for the
procedures on saving
tone curve settings.
Saving and Re-using Scanning
Settings
You can save your scan settings in a special settings
file with a .TWN extension. You can either overwrite
the existing settings file, or you can save your settings
as a new file and keep the existing settings file. When
you want to use a particular group of settings again,
you can load the appropriate file.
To save a new settings file that overwrites the old
settings file, do the following: From the Settings menu,
click Save Settings. The new file overwrites the old
settings file.
To save a settings file under a new name and keep the
old settings file, do the following:
1. From the Settings menu, click Save Settings As.
The Save As dialog box appears.
2. Enter a new file name and path.
Page 49