Overlays - Sharp AR-PB2 Operation Manual

ADVANCED PRINTING TECHNIQUES
Input Tray Options
Set an optional paper feed unit if installed.
Large Capacity Tray
Specify whether an optional large capacity tray is installed.
Duplex Module
Specify whether a duplex module is installed. In some models, the duplex module is installed as
standard equipment. Be sure to select the 'Duplex Module' in the dialog box.
Output Tray Options
Select an optional finisher if installed. '1 Exit Tray', '2 Exit Trays', '2-Tray Finisher' (AR-FN2) or
'3-Tray Finisher' (AR-FN1) can be configured.
Installed RAM
Specify the total capacity of the installed RAM in the Printer Expansion Kit. (To confirm the capacity
of the installed RAM, execute 'PRINT CONFIGURATION PAGE' in the printer configuration menu.
See page 28.)
Extended Imaging Feature
Specify the toner save mode and/or smoothing feature you desire.
The extended imaging feature is not available with the AR-280/AR-285/AR-335 printers.
Copier HDD
Specify whether a copier HDD is installed.

Overlays

If the 'Overlays' tab is selected, the form overlay function can be set. This function overlays all
printed pages with the same form. The Overlays function can be used only with the PCL5e printer
driver.
Overlays:
Create Overlay:
Delete Overlay:
Delete All:
Query Page Overlay:
Selected Overlay Status: The status of the selected overlay file is displayed in this box.
Overlay Creation Status: The status of overlay file creation is displayed in this box.
Registered overlay files are displayed in this list box and a selected
overlay file is highlighted.
Click to select an overlay file to create.
Click to delete a selected overlay file.
Click to delete all overlay files.
If this check box is checked, inquiry about downloading of an overlay
file is performed each time printing is executed.
26