To Resume Playback After Stopping (Resume Play); Dvd Mode Operation Indicators - Sharp HT-CN650DVW Operation Manual

DVD playback (continued)
HT-CN650DVW
To interrupt playback
Press the PLAY/PAUSE
To resume playback from the same point, press the PLAY/PAUSE
To stop playback
DVD/VCD/SVCD/DivX:
Press the STOP ( ) button twice.
Audio CD/MP3/JPEG:
Press the STOP ( ) button.
When the unit is left unoperated for more than 5 minutes after pressing the STOP
( ) button, a screen saver appears (see page 21 when the screen saver setting is
"ON").
Press any button on the main unit or remote control. The startup screen returns.
Caution:
Close the disc tray when not in use. Otherwise, dust may accumulate inside and
cause malfunction.
The unit gets slightly warm when used for a long time. It does not mean the unit is
damaged.
When attempting to play discs with scratches or of a different region number, or
unplayable or restricted (*1) discs, an error message will appear on the TV display
and the disc will not play.
(*1) Viewing is prohibited on some DVDs according to the audience age.
Notes:
During disc initialisation, the volume cannot be adjusted.
Stop positions may be recorded on some discs. When you play such a disc,
playback stops there.
During an operation, "
the disc.
The main unit detects loaded discs automatically and then the indicators light up.
28
( ) button.
" may appear indicating that the operation is disabled by
V CD CD MP3
To resume playback after stopping (resume
play)
( ) button.
You can resume playback from the point playback is stopped.
1
Whilst a disc is playing, press the STOP
( ) button.
The system stores the point you stopped.
2
To restart play, press the PLAY/PAUSE
Play resumes from the point you stopped.
To cancel the resume playback:
Press the STOP
Notes:
The resume playback feature is disabled on some discs.
Depending on the disc, playback may resume from slightly before the stopped
position.

DVD mode operation indicators

The following are examples of operation indicators that appear during DVD playback.
Operation
When the power is on
without a disc
Disc data is being
read
Stop
Play
Pause
( ) button twice.
TV screen
TITLE TRK
NO DISC
TITLE TRK
LOADING
Press Play Key To Continue
( ) button.
Unit display
PRESET CHP PROG SLEEP REPEAT 1 A - B
KHz
MHz
PRESET CHP PROG SLEEP REPEAT 1 A - B
KHz
MHz