Sharp HT-CN300W Operation Manual page 31

„ Speaker delay setting
When some of the speakers are at a different distance from the listening point, you
can select speaker delay to make it seem as though the speaker distances are the
same.
1
Press the SET UP button.
2
Within 10 seconds, press the or
and press the ENTER button.
3
Within 30 seconds, press the or
speaker.
4
Within 30 seconds, press the or
and press the ENTER button.
TV screen
z You can change the distance in 0.1 m increments.
z To set the distance of other speakers, repeat the operation from step 3.
z You can complete the setting operation by pressing the SET UP button twice.
Speaker type
FL Front speaker (Left)
CT Centre speaker
FR Front speaker (Right)
SR Surround speaker (Right)
SL Surround speaker (Left)
SW Subwoofer
Initial setting of the distance of all the speakers is 2.0 m.
Measure the distance between each speaker and the listening position, and set
the speaker delay.
button to select "SP DELAY",
button to select the desired
button to select the distance
In the above illustration, the front speakers, centre speaker, and subwoofer are
positioned at 3 m, and the surround speakers are at 4 m from the listening position.
This unit calculates the delay time automatically according to the distance you set,
and provide the same effect as if they are placed at the same distance from the
listening position.
Adjustable range
0.1 - 9.0 m
0.1 - 9.0 m
0.1 - 9.0 m
0.1 - 9.0 m
0.1 - 9.0 m
0.1 - 9.0 m
CT
FR
FL
3 m
SW
3 m
3 m
3 m
4 m
4 m
SL SR
02/7/11 HT-CN300W_A_4.fm
HT-CN300W
30