Sharp 32R-S50 Operation Manual page 30

Set Up (Continued)
L Saving broadcast TV channels into memory.
1.1
Press MENU to access MAIN MENU
screen, then press CH UP ( 8 ) or DOWN
( 9 ) to move the " " mark to "SET UP".
1.2
Press VOL (+) or (–) to access SET UP
mode, then press CH UP ( 8 ) or DOWN
( 9 ) to move the " " mark to "CH
SETTING".
1.3
Press VOL (+) or (–) to access CH
SETTING screen.
1.4
Press CH UP ( 8 ) or DOWN ( 9 ) to move
the " " mark to "CH SEARCH", then press
VOL (+) or (–) to access CH SEARCH
screen.
START
2.1
Press VOL (+) . The tuner will search
through all available channels in your area
and add them into the TV's memory.
STOP
2.2
Press VOL (–) . CH SEARCH will stop at
the current channel and will not add any
higher channels.
2.3
Press MENU to exit.
Note:
• If you press VOL (+) again while in the CH SEARCH mode, auto-
program will start again, and the previously memorized channels will
be lost.
L Adding weak or additional channels or erasing unwanted channels from TV memory.
1.1
Press MENU to access MAIN MENU
screen, then press CH UP ( 8 ) or DOWN
( 9 ) to move the " " mark to "SET UP".
1.2
Press VOL (+) or (–) to access SET UP
mode, then press CH UP ( 8 ) or DOWN
( 9 ) to move the " " mark to "CH
SETTING".
1.3
Press VOL (+) or (–) to access CH
SETTING mode, then press CH UP ( 8 ) or
DOWN ( 9 ) to move the " " mark to "CH
MEMORY".
2.1
Press VOL (+) or (–) to access CH
MEMORY.
2.2
Use CH UP ( 8 ) or DOWN ( 9 ) or REMOTE
KEYPAD to select each desired channel
to add or erase.
2.3
Press VOL (+) to add a channel to the TV's
memory or press VOL (–) to erase a
channel from the TV's memory.
30
30-32 32/36R-S50.p65e
→
(STOP)
or
30
→ E Z S E T U P
A I R / C A B L E
C H S E A R C H
C H MEMOR Y
CH
→
MENU
(CH SETTING mode)
(START)
C H S E A R C H
A I R 1
(CH SEARCH mode)
→
E Z S E T U P
A I R / C A B L E
C H S E A R C H
C H MEMOR Y
→
(CH SETTING mode)
→
19/1/01, 5:15 PM
2
S T A R T : +
S T O P : –