Projecting A Reversed/Inverted Image - Sharp Notevision XG-C58X Operation Manual

Setup

Projecting a Reversed/Inverted Image

Projection from behind the screen
■ Place a translucent screen between the projector and the au-
dience.
■ Reverse the image by setting "Rear" in "PRJ Mode". See
page 71 for use of this function.
Projection using a mirror
■ Place a mirror (normal flat type) in front of the lens.
Info
• When using a mirror, be sure to carefully position both the pro-
jector and the mirror so the light does not shine into the eyes of
the audience.
Ceiling-mount setup
■ It is recommended that you use the optional Sharp ceiling-mount
bracket for this installation.
Before mounting the projector, contact your nearest Sharp
Authorized Projector Dealer or Service Center to obtain the
recommended ceiling-mount bracket (sold separately).
• AN-XGCM55 ceiling-mount bracket, its AN-EP101B
extension tube and AN-JT200 universal bracket, adaptor for
non-level ceiling installation (for U.S.A.).
• BB-M20T ceiling adaptor, its BB-NVHOLDER280,
BB-NVHOLDER550, BB-NVHOLDER900 ceiling mount
systems (for GERMANY).
• AN-60KT ceiling-mount bracket, its AN-TK201 and AN-TK202
extension tubes (for countries other than the U.S.A. and
GERMANY).
■ Be sure to adjust the position of the pro-
jector to match the distance (H) from the
lens center position (see page 28) to
the lower edge of the image, when
mounting the projector on the
ceiling.
■ Invert the image by setting
"Ceiling + Front" in "PRJ
Mode". See page
use of this function.
-32
71 for
When using the default setting.
▼On-screen Display
The image is reversed.
When using the default setting.
▼On-screen Display
The image is inverted.