Setting The Anti-Theft; Entering The Keycode - Sharp Notevision PG-M20X Operation Manual

Setting the Anti-Theft
The anti-theft function prevents unauthorized use of the projector. You can choose to use
this function or not. If you do not want to use this function, just do not enter the keycode.
Once the theft-deterrent function is activated, users will need to enter the correct keycode
each time the projector is started. Failure to enter the correct keycode will prevent images
from being projected. The following procedures explain how to use this function.

Entering the Keycode

• "Anti-Theft" cannot be selected unless
"Password" is set. (See page 61.)
• When "Anti-Theft" is selected, the password
input box will appear. Enter the keycode af-
ter the right password is entered.
Select "Anti-Theft" in the "Options (2)"
menu ➝ For details, see page 38.
1
Press any button you like on
the remote control or projec-
tor to set the first digit in "New
Code".
Note
• The following buttons on the remote
control and projector cannot be set
as keycodes:
• POWER button
• ENTER button
• UNDO button
• MENU button
• FORWARD button
• BACK button
2
Enter the remaining 3 digits by
pressing any buttons you like.
3
Enter the same keycode once
more in "Reconfirm".
Note
• The Keylock function will become
temporarily disabled.
-63