Disabling Deletion Of Job Programs; Disabling Of Document Feeder - Sharp AR-C330 Key Operator's Manual

Digital full color copying machine

Hide thumbs Also See for AR-C330:

Table of Contents

Disabling of Bypass-Tray in Duplex Copy

This program is used to disable the use of the bypass tray when making

duplex copies.

Disabling Deletion of Job Programs

This program is used to prevent stored programs from being replaced

or deleted. If this program is set, storing of job programs is also

disabled.

This program is used to prevent the use of the optional document

feeder when it malfunctions.

Disabling of Duplex Copying

This program is used to enable or disable the duplex system. If a

malfunction occurs within the duplex system of the copier, the system

can be disabled until it is serviced. The rest of the copier in the

meantime will remain operable.

KEY OPERATOR PROGRAMS

To disable use of the bypass tray when making duplex

copies, press the check box of "DISABLING OF BYPASS-

TRAY IN DUPLEX COPY" to display a check mark in the

check box.

To restore use of the bypass tray, press the check box of this

program again to clear the check mark in the check box.

To prevent job programs stored in memory from being

replaced or deleted, press the check box of "DISABLING

DELETION OF JOB PROGRAMS" to display a check mark in

the check box.

To allow replacement/deletion, press the check box of this

program again to clear the check mark in the check box.

To prohibit use of the document feeder, press the check box

of "DISABLING OF DOCUMENT FEEDER" to display a check

mark in the check box.

To enable use of the document feeder, press the check box

of this program again to clear the check mark in the check

box.

Table of Contents