Stream Feeding Mode - Sharp AR-C330 Key Operator's Manual

Stream Feeding Mode

This program is only available when the optional RADF is installed and
used to enable the stream feeding mode of the optional document
feeder. When the stream feeding mode is enabled, additional originals
which are set in the document feeder tray within 5 seconds after the last
original in a stack was fed will be fed and copied automatically.
Override Sorter Bin Capacity Limi
This program is only available when the optional staple sorter is
installed and used to control operation in case of bin capacity
overflow of an optional staple sorter. If the control is canceled,
copying in the SORT, STAPLE SORT, or GROUP mode can be
started even if copies remain in a sort bin. Also, copying can be
continued even if the number of copies in a sort bin exceeds the limit,
though copies will not be stapled.
KEY OPERATOR PROGRAMS
To enable the stream feeding mode, press the check box of
"STREAM FEEDING MODE" to display a check mark in the
check box.
To disable this mode, press the check box of this program
again to clear the check mark in the check box.
t
To cancel the control, press the check box of "OVERRIDE
SORTER BIN CAPACITY LIMIT" to display a check mark in
the check box.
To restore the control, press the check box of this program
again to clear the check mark in the check box.
(It is recommended not to cancel this control except for the case of
necessity.)
15