Epson POWERLITE 83V+ User Manual page 59

■
User's Logo
Turn on to display the image or logo you have captured
whenever the projector is turned on. See page 63 for more
information.
■
Projection
Projector is in front of the screen.
Front:
Front/Ceiling:
upside-down from the ceiling.
Projector is behind the screen.
Rear:
Rear/Ceiling:
upside-down from the ceiling.
To change from
, press and hold the
Rear/Ceiling
remote control for five seconds.
■
Operation
Direct Power On:
starts as soon as you plug in the power cord. You don't have
to press the P
Sleep Mode:
if it has not received any input signals for a period of time (as
defined in the Sleep Mode Time setting).
Sleep Mode Time:
period of time before the projector turns off automatically,
from 1 to 30 minutes.
Lens Cover Timer:
the power off automatically when the
closed for more than 30 minutes.
High Altitude Mode:
altitude above 4,921 feet (1,500 meters), turn this setting on
to ensure that the internal temperature of the projector is
regulated properly. Turn this setting off for lower elevations.
■
Language
Select the language to be used for the projector menus.
4. When you're finished, press
Projector is in front of the screen, mounted
Projector is behind the screen, mounted
to
Front Front/Ceiling
A/V Mute
When this feature is enabled, projection
button.
Power
When enabled, the projector turns off the lamp
When Sleep Mode is on, you can set the
This feature is enabled by default to turn
When using the projector at an
or
Esc Menu
or to
Rear
button on the
slide is
A/V Mute
.
note
Logo settings cannot be
changed if the User's Logo
Protect feature has been
turned on. See page 64.
note
When
Direct Power On
is turned on, press the
button to turn
Power
P
the projector off, wait until
the P light turns a
Power
steady orange, then unplug
the power cord.
Fine-tuning the Projector
59