Table of Contents
Advertisement
Integrated Management for Projector Status Check and Control (EMP Monitor)
Registration Using the Projector's IP Address (Manual
Registration)
PROCEDURE
In the "Register projector" dialogue box, click
1
"Manual Registration".
Enter the
IP address
2
register in the "IP address" field, and click "Confirm".
When a projector with the same IP addres is found, the
projector name is displayed. If this isn't the projector you
wanted to register, enter the correct IP address and click
"Confirm".
Click "Add".
3
Enter the projector's Adminstrator password and
4
click "OK".
of the projector you wish to
Editing the Manually Registered Projector List
If the name or
IP address
of a manually registered projector has been
changed, use the following procedure to edit the projector list.
PROCEDURE
Select the projector you wish to edit in the "Register
1
projector" dialogue box, and click "Edit".
When the projector has been renamed, click
2
"Confirm". When the IP address of the projector has
been changed, enter the new IP address and click
"Confirm".
Make sure that the correct projector name is displayed.
Click "Update".
3
Deleting a Projector from the List
PROCEDURE
Select the projector you wish to delete from the list
shown in the "Register projector" dialogue box, and
click "Delete".
Multiple projectors can be deleted from the projector list
simultaneously.
EasyMP .net Operation Guide
41
Advertisement
Chapters
Table of Contents
