Projector Connection By Creating A Projector Group; Creating A Group - Epson POWERLITE 8300I EMP-8300 Operation Manual

Projecting PC Images (Network Screen)
TIP
The next time EMS NS Connection is started, the projector you have
added to the "Registered Projectors" in the last operation is NOT
displayed. If you wish to display the same projector in the next and
subsequent operations, you must create a group and register the
desired projector in it. ( p.29)

Projector Connection by Creating a Projector Group

The projector name can be displayed each time EMS NS Connection is
started if a group has been created and the projector has been registered in
the group. If not registered in the group, the projector name will not be
displayed the next time EMS NS Connection is started.
EMS NS Connection allows you to register up to 16 projectors in a single
group. The following explains how to create a group and how to connect a
projector using the group.

Creating a Group

PROCEDURE
Select "Start- "Program" (or "All Programs")-
1
"EPSON Projector"- "EMP NS Connection" in this
order to start EMP NS Connection.
Click "Extension".
2
Check "Use IP-specified connection" and "Use group
3
list", and click "Advanced".
To add a group, click "New".
4
TIP
To edit an existing group, select a group name from "Connection
Groups" and proceed to Step 6.
Enter a group name in "Connection Group".
5
EasyMP .net Operation Guide
29