Epson PowerLite 7550C User Manual page 58

50
1 • Setting Up the Projector
3. Press the Power button on the remote control or the control
panel on top of the projector. The power light flashes green as
the projector warms up. When the projector is fully warmed up,
this light remains green.
If computer or video equipment is attached, the computer or video
signal is projected. Allow about 30 seconds for full illumination.
Warning: Never look into the lens when the lamp is on. This can
damage your eyes. It is especially important that children not look
into the lens.
When you want to stop projecting images, press the Power button
again. The fan remains on and the power light flashes orange for
about two minutes as the projector cools down.
Note: Projecting an image for an extended time may cause an
afterimage to appear on the screen.
power light
projector lamp light
temperature light