Epson PowerLite 7550C User Manual page 117

104
4 • Using ELP Link III
The table below describes the available functions and how to use
them.
Function Description and usage
Line Draws a straight line on the screen.
Press the Effects button assigned to this effect. Then press the bottom
multi-purpose button once to define the line start position. Move the
pointer using the remote pointer button. Then press the bottom
multi-purpose button again to define the line end position. To draw
another line, position the pointer where you want the line to start and
press the bottom multi-purpose button again to define the new line start
position.
Ellipse Draws an ellipse (oval) on the screen.
Press the Effects button assigned to this effect. Then press the bottom
multi-purpose button once to define the start position of the ellipse.
Move the pointer using the remote pointer button. Then press the bottom
multi-purpose button again to define the end position of the ellipse. To
draw another ellipse, position the pointer where you want the ellipse to
start and press the bottom multi-purpose button again to define the start
position for the new ellipse.
Box Draws a box on the screen.
Press the Effects button assigned to this effect. Then press the bottom
multi-purpose button once to define the position of one corner of the
box. Move the pointer using the remote pointer button. Then press the
bottom multi-purpose button again to define the position of the opposite
corner of the box. To draw another box, position the pointer where you
want the box to start and press the bottom multi-purpose button again to
define the start position for the new box.