Listening To A Cassette Tape - Sharp QT-UH5H Operation Manual

Listening to a cassette tape

QT-UH5H
ENGLISH
Cassette Tape
Before playback:
For playback, use normal or low-noise tapes for
the best sound. (Metal or CrO tapes are not
recommended.)
Do not use C-120 tapes or poor-quality tapes, as
they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
TAPE TAPE
E-19
RECORD PLAY REWIND F.FWD STOP/EJECT PAUSE
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TAPE button.
3
Open the cassette compartment by pushing the STOP/
EJECT / button.
4
Load a cassette into the cassette compartment with the
side to be played facing up.
5
Press the PLAY button.
6
To advance the tape, press the STOP/EJECT /
then press the F.FWD
STOP/EJECT / button, then press the REWIND
ton.
To interrupt playback:
Press the PAUSE button during playback.
Press the PAUSE button again to resume playback.
To stop playback:
Press the STOP/EJECT / button.
Precautions:
Be sure not to press the PLAY
simultaneously, or the tape will become damaged.
Before changing from one tape operation to another, press the
STOP/EJECT / button.
Do not press the PAUSE button whilst the fast forward or rewind
operations are in progress. The F.FWD
button will not be released when the tape end is reached. Once
this occurs, press the STOP/EJECT / button.
Notes:
Tape play button will automatically released when the end of the
tape has been reached.
Fast forward or rewind button cannot automatically released when
the end of the tape has been reached. Make sure to press the
STOP/EJECT / button when the end of the tape has been
reached.
button,
button. To rewind, press the
but-
and REWIND buttons
or REWIND