To Remove Usb Memory Device - Sharp QT-UH5H Operation Manual

3
Select desired file to be played back by pressing the
/ button.
4
Press the USB / button.
Playback will be start and the MP3 or WMA indicator will be
displayed.
Title, Artist and Album name is displayed if it is recorded on the
disc.
Display content can be changed by pressing the MEMORY/
DISP button.
TRACK MP3 TRACK MP3
FOLDER TRACK
NUMBER NUMBER
TRACK MP3 TRACK MP3
ALBUM NAME
MP3 ID3-Tag only support version 1.x.
Note:
To pause playback:
Press the USB / button.
TITLE NAME
TRACK MP3 TRACK MP3
TRACK MP3 TRACK MP3
ARTIST NAME

To remove USB memory device

1
Press the USB button on main unit.
2
Disconnect USB memory device from the USB terminal.
3
"NO USB" will appears on FL display.
Notes:
SHARP will not be held liable for the loss of data whilst the USB
memory device is connected to the audio system.
Files compressed in MP3 and / or WMA format can be played
back when connected to the USB terminal.
This USB memory's format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will work
on this audio system.
This USB memory cannot be operated via USB hub.
If "NO SUPPORT" is displayed, it means "Copyright protected
WMA file" or "Not supported playback file" is selected.
In case the data inside the USB memory is large, it may take a
longer time for data to be read.
External storages cannot be playback via the USB terminal.
The USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
QT-UH5H
ENGLISH
E-14