Focusing And Zooming Your Image; Selecting The Image Source; Adjusting The Height Of Your Image; Adjusting The Image - Epson PowerLite 765c Parts Manual

If you're using a Macintosh
You may need to set up your system to display on the projector
screen as well as the LCD screen. Follow these steps:
®
1. From the Apple menu, select
click .
Displays
2. Select or
VGA Display Color LCD
, and make sure
Arrangement
If you're using a Macintosh with OS 8.6 to 9.x:
You may need to set up your system to display on the projector
screen as well as the LCD screen. Follow these steps:
1. From the Apple menu, select
or
Monitors Monitors and Sound
2. Click the icon.
Arrange
3. Drag one monitor icon on top of the other.
If the option isn't available, try selecting one of the
Arrange
Simulscan resolution settings. Click the
necessary, and then select a
seconds for the projector to sync up after making the selection.)

Selecting the Image Source

If multiple devices are connected to the projector, the easiest
way to select the image source is to press the
the remote control or the
Source Search
projector until the correct image is projected.
You can also press one of the following
remote control:
to select the device connected to the projector's
Computer
Computer/Component Video
to select the device connected to the
S-Video
port.
S-Video
to select the device connected to the
Video
port.
Video
to project wirelessly or from a memory card.
EasyMP
After you select a source, the screen goes dark for a moment
before the image appears.
®
with OS X:
System Preferences
, click or
Arrange
is checked.
Mirror Displays
, then click
Control Panels
.
icon, if
Monitor
resolution. (Allow a few
Simulscan
button on
Search
button on the
buttons on the
Source
port.
Epson PowerLite 755c/765c Projector

Adjusting the Image

Once you see your image, you may need to make certain
, then
adjustments, as described in this section.

Focusing and Zooming Your Image

Rotate the focus ring to sharpen the image.
Rotate the zoom ring to reduce or enlarge the image.
You can also change the image size by moving the projector
closer to or farther away from the screen. You can use the
buttons on the remote control to zoom in on a portion
E-Zoom
of the image. See "Zooming Your Image" on page 8 for
instructions.

Adjusting the Height of Your Image

If the image is too low, you can raise it by extending the
projector's front foot.
1. Stand behind the projector. Press up on the blue foot release
lever and lift the front of the projector to extend the foot.
2. Once the image is positioned where you want it, release the
lever to lock the foot in position.
8/05 Epson PowerLite 755c/765c Projector
Focus ring
Zoom ring
5
-