Timer Operation - Sharp AH-A09BF Operation Manual

TIMER OPERATION

TIMER OFF
The unit will turn off automatically according to your setting.
Timer duration can be set from minimum 0.5 hours (30 minutes) to maximum 12
hours.
Up to 9.5 hours, you can set by 0.5 hours (30 minutes) increments and from 10 to 12
hours, by 1 hour increment.
MODE TEMP.
FAN TIMER
TEMP.
DISPLAY MODE
1H FAN
SWING CANCEL
Example : When you wish to
stop the operation
2.5 hours later.
TIPS ABOUT TIMER OFF OPERATION
When the TIMER OFF is set, the temperature
setting is automatically adjusted to prevent
the room from becoming excessively cold
while you sleep. (Auto Sleep function)
• One hour after the timer operation begins,
the temperature setting rises 1°C higher
than the original thermostat setting.
Point the remote control at the signal receiver win-
dow on the unit.
1
Press the TIMER OFF (
time as desired.
• The time setting will change as you to press
the button as follows,
0.5H 1.0H 1.5H
Hold the button pressed down for fast setting.
• The orange TIMER lamp (
1
will light.
• The unit will generate a beep when it re-
ceives the signal.
• The time setting will count down to show
remaining time.
TO CANCEL TIMER
Press the CANCEL button.
• The orange
TIMER lamp
(
unit will turn
off.
TO CHANGE TIMER SETTING
Press the TIMER button which you wish to
change, (TIMER OFF or TIMER ON) and
change the time setting.
12
) button and set
10H 11H 12H
) on the unit
DISPLAY MODE
) on the
1H
SWING CANCEL
FAN