JVC KD-R601 Instructions Manual page 40

Symptoms
• The iPod does not turn on or does not work.
• The sound is distorted.
• No sound can be heard in "IPOD MODE."
• Playback stops.
• "CANNOT PLAY" appears on the display.
• "RESTRICTED" appears on the display.
• "NO FILES" appears on the display.
• The iPod's controls do not work after
disconnecting from this unit.
• "NO IPOD" appears on the display.
• No sound can be heard when connecting
an iPod nano.
• "RESET 1" – "RESET 7" appears on the
display.
• "RESET 8" appears on the display.
• Microsoft and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the
United States and/or other countries.
• The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Victor
Company of Japan, Limited (JVC) is under license. Other trademarks and trade names are those of their respective
owners.
• "Made for iPod" means that an electronic accessory has been designed to connect specifically to iPod and has been
certified by the developer to meet Apple performance standards.
• "Works with iPhone" means that an electronic accessory has been designed to connect specifically to iPhone and
has been certified by the developer to meet Apple performance standards.
• Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
• iPod is a trademark of Apple Inc., registered in the U.S. and other countries.
• iPhone is a trademark of Apple Inc.
40
Remedies/Causes
• Check the connecting cable and its connection.
• Update the firmware version of the iPod/
iPhone.
• Charge the battery of the iPod/iPhone.
• Reset the iPod/iPhone.
• Check whether "IPOD SWITCH" setting is
appropriate (see page 30).
Deactivate the equalizer either on this unit or the
iPod/iPhone.
Check whether "IPOD SWITCH" setting is
appropriate (see page 30).
The headphones are disconnected during
playback. Restart the playback operation (see
pages 20 and 21).
No tracks are stored. Import tracks to the
iPod/iPhone.
Check whether the connected iPod/iPhone is
compatible with this unit (see page 35).
No tracks are stored. Import tracks to the iPod.
Reset the iPod.
• Check the connecting cable and its connection.
• Charge the battery.
• Disconnect the headphones from the iPod
nano.
• Update the firmware version of the iPod nano.
Disconnect the adapter from both this unit and
iPod. Then, connect it again.
Check the connection between the adapter and
this unit.