note
The lamp usage timer
doesn't register until you've
used the lamp for at least
10 hours.
Configuring the Projector
64
Viewing Lamp Usage and Other
Information
Use the Info menu to view information about the display settings of
your computer and video devices and the number of hours the lamp
and filter have been used.
1. Press the
button on the remote control and highlight
Menu
You see one of the following menus:
Computer (analog RGB, RGB video, and component video)
Video (composite and S-Video)
■
Lamp Hours
Displays the number of hours the lamp has been used. The
life span of the lamp is about 4000 hours in High or Low
brightness mode. If the number shown is close to 4000 or the
information is displayed in red, make sure you have a spare
lamp handy.
Info.