Epson PowerLite 6110i User Manual page 57

2. Use the pointer button to highlight menu items, then press
the button to select from any of the following options:
Enter
(computer images)
■
Auto Setup
Leave this setting
image when you switch to a computer source. Turn it
you want to save adjustments you have made to the video
settings below.
(computer images)
■
Tracking
Removes unwanted vertical lines from a computer image by
matching the projector's internal clock to various computer
signals. See page 102 for more information about adjusting
the tracking setting.
■ (computer images)
Sync.
Corrects fuzziness or screen flicker by synchronizing the
projector with the tracking signal sent from the computer.
See page 102 for more information about adjusting the sync.
setting.
■
Position
Use the pointer button to move the image on the screen
left, right, up, or down.
■
Progressive
Leave this setting
video so that interlaced-to-progressive conversion is carried
out (best for fast-moving pictures). If you notice flickering
while viewing still images, switch this setting to
■
Computer1 Input
Selects the signal from equipment connected to the
port. If your image colors look wrong, try
Computer1
changing this setting to
component video sources.
■
Computer2 Input
Selects the signal from equipment connected to the
port. If your image colors look wrong, try
Computer2
changing this setting from
RGB video sources, or to
video sources.
to automatically optimize the computer
On
when viewing S-Video or composite
On
, or to
Auto Component Video
to
Auto RGB
Component Video
if
Off
.
Off
for
for computer or
for component
Configuring the Projector
note
You can also use the remote
control's button to
Auto
automatically reset the
projector's tracking, sync,
and position settings.
57