Sharp QT-CD110H Operation Manual page 8

YT <P=001>
ENGLISH
A
NAMES OF CONTROLS AND
INDICATORS
11.
Cassette Compartment
12.
CD Compartment
13.
Tuning Control
14.
(TAPE) Record Button:
15.
(TAPE) Play Button:
0
16.
(TAPE) Rewind Button:
3
17.
(TAPE) Fast Forward Button:
18.
(TAPE) Stop/Eject Button:
19.
(TAPE) Pause Button:
6
10.
CD Eject Button:
7
11.
(CD) Play Indicator:
0
12.
(CD) Track Number Indicator
13.
(CD) Repeat Indicator:
R
14.
Volume Control
15.
Stand-by, On/Function Switch
16.
Extra Bass Button: X-BASS
17.
(CD) Track Down/Review Button:
18.
(CD) Track Up/Cue Button:
19.
(CD) Stop Button:
20.
(CD) Play/Repeat Button:
0R
21.
FM Telescopic Rod Aerial
22.
Headphone Socket
23.
Battery Compartment
24.
AC Power Input Socket
Supplied accessory
Parts and accessories mentioned in this oper-
ation manual other than those in the drawing are
not included.
AC power lead 1
Note:
The AC power lead is located in the battery
compartment.
Marks [A] - [I] in the text correspond to the marks
in the illustration.
PRECAUTIONS
Do not use oil, solvents, petrol, paint thinners or
insecticides on the unit.
Do not expose the unit to moisture, to tempera-
tures higher than 60˚C (140˚F) or to extreme low
temperatures.
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home compu-
ters, facsimiles, etc.) which generates electrical
noise.
Hold the AC power plug by the head when re-
2
moving it from the AC socket, since pulling the
lead can damage internal wires.
7
When cleaning the heads, pinch roller, etc,
remove the AC power plug from the wall socket
as the unit contains high voltages.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
Use the unit on a firm, level surface free from
vibration, and do not place anything on the top
of the unit.
If the unit does not work properly whilst in use,
set the FUNCTION switch to STAND-BY and
then to ON again.
If an electrical storm is taking place near you, it
is suggested that you disconnect the AC power
5 / 3
lead from the AC socket for safety.
4 / 2
Warning:
The voltage used must be the same as that specified
on this unit. Using this product with a higher voltage
other than which is specified is dangerous and may
result in a fire or other type of accident causing
damage. SHARP will not be held responsible for any
damage resulting from use of this unit with a voltage
other than that which is specified.
Condensation
Sudden temperature changes, storage or operation
in an extremely humid environment may cause con-
densation inside the cabinet (CD pickup, tape
heads, etc.).
Condensation can cause the unit to malfunction.
If this happens, leave the power on with no disc (or
cassette) in the unit until normal playback is possible
(about 1 hour).
Warning:
CD players use a laser pickup which can damage
the eyes if viewed directly. Do not look at the pickup,
and do not touch the pickup directly.
E-1
QT-CD111H/110H(SEEG) TINSZ0001SJZZ