Table of Contents
Advertisement
Projector (Rear View)
Intake ventilative hole
62
INPUT 2/DIGITAL INPUT
14
Using the Terminal Cover
When the projector is used on a desktop, high mounted or ceiling mounted, attach the terminal cover (supplied)
to hide the connecting cables.
Attaching the Terminal
Cover
1 Align with the tabs on
the projector and
then press the
terminal cover in the
direction of the arrow.
2 Tighten the two
screws on the bottom
of the projector.
Remote control sensor
18
INPUT 3 S-VIDEO terminal
terminal
AC socket
INPUT 1 COMPONENT
terminals (RCA)
INPUT 4 VIDEO terminal (RCA)
1
2 Tighten the screws
11
62
15
(4-pin Mini DIN)
17
16
Removing the Terminal
Cover
1 Loosen the two screws
on the bottom of the
projector.
2 Raise the terminal cover
and pull it out in the
direction of the arrow.
Intake ventilative hole
23
RS-232C terminal
(9-pin D-sub)
20
DIGITAL INPUT
TYPE switch
2
1 Loosen the screws
-9
Advertisement
Table of Contents
