Quick Guide - Sharp XV-Z201E Operation Manual

Quick Guide

In this page, connection of the projector and the video equipment is explained as an example
for the procedure from setup to projection. Refer to each page for details.
Required equipments
Projector
1. Place the projector facing a wall or a screen.
2. Connect to video equipment. (Page 16)
Video cable
3. Connect the output terminal of the video equip-
ment to the input terminal of the audio equip-
ment using an audio cable.
4. Plug the power cord into the AC socket of the
projector and into the wall outlet. (Page 14)
5. Remove the lens cap from the lens.
Lens cap
Remote control
• Insert the batteries.
(Page 11)
To INPUT 4
terminal
To video out
put terminal
Adjust the focus by
rotating the focus ring.
Power cord
Power cord
6. Turn the projector on using
control. (Page 30)
ON button
INPUT 4 button
7. Press on the remote control to select the
INPUT 4 mode. (Page 31)
"On-screen Display
8. Turn on the video equipment.
9. Play the video.
10.Adjust the image size, image position and the
focus. (Page 25)
Adjust the zooming by
moving the zoom knob.
Note
•
This projector can also be connected to a computer
as well as to video equipment. (Page 21)
Video equipment
Video cable
on the remote
The power indicator
illuminates green.
ON
Adjust the height of the image
by rotating the lens shift dial.
-7