Sharp XV-Z10E Operation Manual page 55

Info
• If the temperature warning indicator blinks, and the projector enters the standby mode, follow the possible
solutions on page 52 and then wait until the projector has cooled down completely before plugging in the
power cord and turning the power back on. (At least 5 minutes.)
• If the power is turned off for a brief moment due to power outage or some other cause while using the
projector, and the power supply recovers immediately after that, the lamp indicator will illuminate in red and
the lamp may not be lit. In this case, unplug the power cord from the AC outlet, replace the power cord in the
AC outlet and then turn the power on again.
• If you want to clean the air vents during projector operation, be sure to put the projector into the standby
mode by pressing
clean the vents.
• The cooling fan keeps the internal temperatures of the projector constant and this function is controlled
automatically. The sound of the cooling fan may change during operation because the fan speed may change
and this is not a malfunction.
• Do not unplug the power cord after the projector has entered the standby mode and while the cooling fan is
running. This can cause damage due to rise in internal temperature, as the cooling fan also stops.
on the projector or on the remote control. After the cooling fan has stopped,
-53