Controlling the Picture and Sound
You can use the remote control to preview and select your picture
sources, temporarily turn off the picture and sound, freeze the action,
zoom in on the picture, and adjust the volume.
Switching Between Picture Sources
If your projector is connected to more than one computer and/or
video source, you can switch between the different sources:
The easiest way to select your source is to press the
■
on the remote control (or the
projector) repeatedly until you see the image you want on the
screen.
On the remote control, there are four
■
to switch between equipment connected to the port identified on
each button (The
EasyMP
PowerLite 1720/1730W.)
After you select a source, the screen goes dark for a moment before the
image appears.
button on the
Source Search
buttons. Use them
Source
button does not work with the
button
Search
Using the Remote Control
29