Disc Playback; Playing A Disc And Projecting - Epson dreamio EMP-TWD1 User Manual

Disc Playback

Playing a disc and projecting

v
1
Press
A beep sounds and the power comes on.
The same operation can be performed using
on the remote control.
v
2
Place the disc in the disc tray with the
label facing upwards.
When using 8 cm discs, place the disc in the
hollow in the center of the disc tray.
v
3
Press
Depending on the disc inserted, operation is as
follows.
Excluding
automatically, and projection begins.It takes a few
seconds from when the lamp lights up until the
projected image is brightly projected.
: Press
playback.The projection lamp does not light.
The same operation can be performed using
on the remote control.
When a menu is displayed
Q Tip When using in high altitude areas of above 1500 m,
set the "High Altitude Mode" to "ON".
page 51
s
14
to open the disc tray.
to close the disc tray.
: The projection lamp lights
to commence audio
s page 21
s page 22
page 23
s
The display window during
playback
Display window
When playing
Chapter number
When playing
When playing
Track number
When playing
Track number
When playing
Group number
Elapsed playback
time
Track number
Elapsed playback
time
Elapsed playback
time
File number