Image" Menu; Color Mode; Color Saturation; Tint - Epson dreamio EMP-TW980 User Manual

Configuration Menu Functions

"Image" menu

Color Mode

Six different settings can be selected for the Color Mode, to match the images being projected or the
projection environment.
Brightness
Adjust this when the output level of the connected equipment is weak and you feel that images are dark.
Contrast
Adjusts the difference between bright and dark areas.
When the contrast is increased, images with greater modulation are obtained.

Color Saturation

This adjusts the colour intensity for the images.
*2

Tint

(Adjustment is only possible when composite video and S-Video signals in NTSC format are being
input.)
This adjusts the image tint.

Sharpness

This adjusts the image sharpness.
Standard
The adjustment results are applied to the entire image.

Advanced

This can be used to adjust a specific region.

Abs. Color Temp.

This adjusts the overall tints of the images.

Skin Tone

This adjusts the skin tones of people who appear in the images.
Advanced
*1
Gamma
This adjusts gamma. You can select a value, or make adjustments while viewing an image or a graph.
p.20
*1
RGB
This lets you adjust the offset and gain for each of the R/G/B colour components.
RGBCMY
This lets you adjust the hue and saturation for each of the R/G/B/C/M/Y colour components.
30
*1
p.18
*2
*2
*2
*2
*2
*2
*1
*1 The setting values are stored separately for each image source and signal type.
*2 The setting values are stored separately for each image source and colour mode setting.
Displayed for input sources other than computer
p.23
p.20
p.20
p.22
p.22