Table of Contents
Advertisement
This can be used to adjust the skin tones for images of people.
The Epson Cinema Filter effect that is automatically applied to images when a "Color Mode" setting is
made creates natural-looking skin tones. If you would like to further enhance skin tones, use this "Skin
Tone" setting to make the adjustment.
If set to the + side, the colours become greenish, and if set to the – side, the colours become reddish.
You can adjust the overall tint of images.
If you select a higher value, images appear bluish, and if you select a lower value, images appear reddish.
The absolute colour temperature can be set to one of 12 settings within the range of 5000K to 10000K.
Customized
("Adjust it from the image")
Use
or
to select first "Customized",
then "Adjust it from the image". Press
to confirm the selection each time.
A gamma icon will appear in the projected image.
(Keystone correction will be temporarily
cancelled while the gamma icon is displayed.)
Use
or
gamma icon to the place where you want to
adjust the brightness, and press
confirm the selection. The place selected and
the regions of the same brightness will flash,
and a gamma graph will appear. Press
again to reconfirm. A screen for adjusting the
tone will appear.
Use
or
to make the adjustment,
and press
or
to confirm it. Press
go back and do it again.
Use
or
then "Adjust it from the graph". Press
A gamma adjustment graph will appear.
to move the
Use
or
to
you want to adjust the tone brightness, and press
adjusting the tone will appear.
or
Use
to
and press
Advanced Colour Adjustments
Customized
("Adjust it from the graph")
or
to select first "Customized",
to confirm the selection each time.
or
to select the point where
or
to confirm the selection. A screen for
or
to make the adjustment,
or
to confirm it.
or
21
Advertisement
Chapters
Table of Contents
