HP StorageWorks 8B - FC Entry Switch User Manual page 16

3
Using ISL Trunking
ISL Trunking Telnet Commands
The following table shows the telnet commands used to manage the ISL Trunking feature.
Table 3-1
Telnet Command
portCfgTrunkport
switchCfgTrunk
trunkDebug
trunkshow
For detailed information on how to use these commands, refer to the Fabric OS Reference Guide.
3-2
ISL Trunking Telnet Commands
Description
Use this command to
configure a port to be
enabled or disabled for
ISL Trunking.
Use this command to
enable or disable
trunking on all ports of a
switch.
Use this command to
debug a trunk link
failure.
Use this command to
display ISL Trunking
membership
information.
Example
To enable port 5 for ISL Trunking,
enter:
portCfgTrunkport 5, 1
To disable port 5 for ISL Trunking,
enter:
portCfgTrunkport 5, 0
To enable ISL Trunking on all ports of
a switch, enter:
switchCfgTrunk 1
To disable ISL Trunking on all ports
of a switch, enter:
switchCfgTrunk 0
To debug ports 1 and 2, enter:
trunkDebug 1, 2
To display ISL Trunking membership
information about users, enter:
trunkshow
ISL Trunking User's Guide