Projection Preparation And Adjustments - Epson EMP-7850 Quick Reference Manual

Projection preparation and adjustments

Set the [R/C] switch
to "ON".
Turn the power on
for all input
equipment.
Press the button.
Check that the power cable is connected to the projector and
to the electrical outlet.
For a video source, press the [Play] button.
Projection starts after a short period.
(Operation) indicator
Flashes green (warm-up in progress/approx. 40 seconds)
→ Lights green (projection in progress)
If "Password Protect" has been enabled, the "Password
Protect Release" screen will be displayed when the power
is turned on for the first time after the power plug is
connected to an electrical outlet. Type in the password.
User's Guide "Preventing theft (Password Protect)"
User's Guide
"Turning the Projector On"