Replacing The Lamp - Epson EMP-7850 Quick Reference Manual

Replacing the Lamp

How to replace the lamp
You will need the provided accessory screwdriver or another flathead screwdriver.
Disconnect the
power cable.
Remove the lamp
cover from the
underside of the
projector.
Turn off the power, wait for the cool down period to end (about
30 seconds) then disconnect the power cable.
Remove the cover when the projector has sufficiently cooled
down. It takes about a further one hour from when the cool
down period has finished for the lamp to be cool enough.
1
Insert the screwdriver into the opening.
Slide the lamp cover until the [
lift up the lamp cover to remove it.
2
] and [ ] marks line up, then