Table of Contents
Advertisement
Air Conditioner
Features
(continued)
TO TURN UNIT OFF:
YOU WILL SEE:
DO THIS:
PRESS
ON/OFF
BUTTON
FAULT CODES
If the display reads "AS", a sensor
has failed.
Contact
your Authorized
Carrier Service
Center
If the display reads "HS", a sensor
has failed.
Contact
your Authorized
Carrier
Service Center
If the display reads "ES", a sensor
has failed.
Contact
your Authorized
Carrier
Service Center
ADDITIONAL
THINGS
YOU SHOULD
KNOW
Now that you have mastered the operating
procedure,
here are more features
in your control that you should
know.
The Remote
Control will operate all the control panel features,
follow the same instructions.
The "Cool "circuit has an automatic
3 minute time delayed start if the unit is turned off and on quickly. This prevents
overheating
of the compressor
and possible circuit breaker tripping.
The fan will continue to run during this time. The
control will maintain
any set temperature
between
60F and 90F degrees
(cooling), 55F and 80F (heating).
The control is capable of displaying
temperature
in degrees
Fahrenheit
or degrees Celsius.
To convert
from one to
the other, press and hold the Up and Down Temperature
Selection
Pads atthe
same time for 3 seconds.
Advertisement
Table of Contents
