Crosley 2020217A1040 Use & Care Manual page 7

Air Conditioner Features
(continued)
TO OPERATE ON FAN ONLY:
YOU WILL SEE:
DO THIS:
PRESS
MODE BUTTON
CHOOSE
FAN ONLY
Note: Use this function only when cooling is not desired, such as for room air circulation.
You can choose any fan speed you prefer.
During this function, the display will show the actual current temperature, not the set temperature as in the cooling mode.
TO USE THE
ENERGY SAVER FEATURE:
I DO THIS:
YOU WILL SEE:
PRESS
MODE BUTTON
CHOOSE
ENERGY SAVER
Note: In this mode, the fan will continue to run for another 3 minutes after the compressor shuts off. The fan then cycles on for 2 minutes
at 10 minute intervals until the room temperature is above the set temperature, at which time the the cooling system turns back on.
HEATING FEATURE (on some models):
........... _,,_,,,_ ,, _*_, ,, _
iiiiiiiiiiiiii! i i
DO THIS:
PRESS
- MODE BUTTON
SELECT HEAT
YOU WILL SEE:
Note: This feature can be used with any combination of FAN Speeds. When in the "Heat" Mode, the fan will run continuously while
heat is needed. The temperature will automatically be maintained anywhere between 55F (13°C) and 80F (27°C). When the room set
temperature is satisfied, the fan will cycle off for 10 minutes, and then on for1 minutes to circulate and sample the room air.