Advertisement
To level the cabinet using the front rollers:
1
Open both doors and remove the toe grille (see "Toe
Grille Installation
and Removal"
in the "Installation"
section).
2
Close the doors and use a flat-blade screwdriver or s/s
inch socket wrench to raise or lower the front rollers.
3
Ensure both doors are bind-free with their seals touching
the cabinet on all four sides.
Raise
[
Open
Door
7116" Wrench
and 3132" Hex Key
(some
models)
..............................
_:i Stop
Flange
Hing e
Flange
m0de,s!
Replace the toe grille by fitting it into place (see "Toe
Grille Installation and Removal" in the "Installation"
section).
To level the doors using the adjustable
lower hinge:
1
Before leveling either door, remove set screw that locks
door height into position. (The door cannot be adjusted
without set screw removed).
2
If the refrigerator door is lower than the freezer door,
raise the refrigerator door by turning the adjustment
screw clockwise using a 7/16inch wrench. (See
illustration.)
PAISE
RAISE
DOOR
3
If the freezer door is lower than the refrigerator door,
raise the freezer door by turning the adjustment screw
clockwise using a 7/16inch wrench. (See illustration.)
4
After leveling, verify door stop contacts lower hinge and
top of door does not contact upper hinge through full
movement of door (from fully closed to fully open).
5
Reinstall set screw, locking the door height.
5
Advertisement
