Programming The Remote Control; Programming Code - LG M197WD Owner's Manual

PROGRAMMING THE REMOTE CONTROL
The remote is a multi-brand or universal remote. It can be programmed to operate most remote-
controllable devices of other manufacturers.
Note that the remote may not control all models of other brands.
Programming a code into a remote mode
Test your remote control.
To find out whether your remote control can operate the component without programming, turn on the
component such as a VCR and press the corresponding mode button (such as a DVD or VCR) on the
remote control, while pointing at the component. Test the POWER and PR + / - buttons to see if the
component responds properly. If not, the remote requires programming to operate the device.
Turn on the component to be programmed, then press the corresponding mode button (such as a DVD or
VCR) on the remote control. The remote control button of desired device is lighted.
Press the MENU and MUTE buttons simultaneously, the remote control is ready to be programmed for
the code.
Enter a code number using the number buttons on the remote control. Programming code numbers for the
corresponding component can be found on the following pages. Again, if the code is correct, the device
will turn off.
Press the MENU button to store the code.
Test the remote control functions to see if the component responds properly. If not, repeat from step 2.
PROGRAMMING CODE
DVD
022 002 005 006
020 014 023 .... 011 015
005 006 008 017 007
HARMAN KARDON 027 PANASONIC 003 009 THOMPSON 005 006
i 013 o19 008
LG 001 010 016 025 PIONEER 004 026 YAMAHA 009 018
013 021 010 016 ORS
MARANT7 024 PROSCAN 005 006
91