Programming The Remote Control - LG 22LG30R-TA Owner's Manual

APPENDIX

PROGRAMMING THE REMOTE CONTROL

(This feature is not available for all models.)
The remote control is a multi brand or universal remote. It can be programmed to operate most remote
controlled devices from other manufacturers.
Note that the remote control may not control all models from other brands.
Programming a code into a remote mode
1
Testing your remote control.
To find out whether your remote control can operate other components without programming, turn on a
component such as a S S T T B B and press the corresponding mode button (such as a D D V V D D or S S T T B B ) on the
remote control, while pointing at the component. Test the P P O O W W E E R R and P P
ponent responds correctly. If the component does not operate correctly, the remote control requires pro-
gramming to operate the device.
2
Switch on the component to be programmed, then press the corresponding mode button (such as a D D V V D D
or S S T T B B ) on the remote control. The remote control button of the desired device is illumintated.
3
Press the M M E E N N U U and M M U U T T E E buttons simultaneously, the remote control is ready to be programmed with
the code.
4
Enter a code number using the number buttons on the remote control. Programming code numbers for the
corresponding component can be found on the following pages. If the code is correct, the device will turn
off.
5
Press the M M E E N N U U button to store the code.
6
Test the remote control functions to see if the component responds correctly. If not, repeat from step 2.
102
buttons to see if the com-
/ /