Epson EMP EMP-1825 User Manual page 52

List of Functions
Making a WPS (Wi-Fi Protected Setup) Connection
When using a WPS-compatible access point, the settings for the
connection between the projector and the access point can be made easily
from the projector's Configuration menu. Either of the "Push Button
Method" or "PIN Code Method" setting methods can be used.
•Push Button Method
Pressing both the [Enter] button on the projector and the button on
the access point, causes the SSID and security settings to be
made. Epson recommends the use of this method when the
projector and access point are close together.
•PIN Code Method
The SSID and security settings are enabled by inputting an 8-digit
code from the computer to the access point, which is then
displayed by the projector. The connection between the computer
and the access point must have already been established. For
details on how to make this connection, refer to the manual
provided with the access point. This method lets you make the
settings without having to press any buttons on the projector.
Therefore, we recommend the use of this method when the
projector is hung from the ceiling.
Start WPS setting.
Procedure
A
From the "Network" tab of the configuration menu,
select "Network Configuration", and then press the
[Enter] button.
The Network Configuration screen is displayed.
52