Load Paper; Connect The Power Cord - Canon MultiPASS F60 Setup Sheet

Load paper.

Place a stack of paper (print side up) in the multi-purpose tray
paper guide A to the width of the stack w. Make sure the stack does not exceed
the paper limit mark B. Then place the tray cover C over the multi-purpose tray.
w
A A

Connect the power cord.

1
Plug the power cord into
a socket.
q
B B
2
When you connect
the machine, the
Alarm light blinks,
and the messages
below should
appear in the LCD.
P L E A S E W A I T
Approx. 30 seconds
P U T I N C A R T R I D G E
q and adjust the
B C
3
If nothing appears in
the LCD, press [ON/OFF
(1 sec.)] to turn on the
machine.
• If you need to turn off the
machine, press [ON/OFF
(1 sec.)] for one second.
ON/OFF(1sec.)