Table of Contents
Advertisement
A
Appendix
System BIOS Settings (cont.)
To enable the RAID function
1� Press <F2> to enter the BIOS Setup during POST�
2� Go to the Advanced menu�
3� Set SATA Operation Mode to [RAID]�
4� Press <F10> to save the configuration and exit the BIOS setup�
To build a RAID set
1� Restart the system and press <ESC> on bootup�
2� Press <Ctrl> + <I> to start the RAID utility�
Intel(R) Matrix Storage Manager option ROM v8.0.0.1038 ICH10R
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0
Hitachi HTS72202 02DP0410DTG564WP
1
Hitachi HTS72202 02DP1400DEG1XRGN
Press <Ctrl-I> to Enter the Configuration Utility..
3� Select a desired RAID set to create�
Intel(R) Matrix Storage Manager option ROM v8.0.0.1038 ICH10R
Copyright(C) 2003-08 Intel Corporation. All Rights Reserved.
1. Create RAID Volume
2. Delete RAID Volume
RAID Volumes:
None defined.
Physical Disks:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 Hitachi HTS72202 02DP0410DTG564WP 186.3GB Non-RAID Disk
1 Hitachi HTS72202 02DP1400DEG1XRGN 186.3GB Non-RAID Disk
[↑↓]-Select [ESC]-Exit [ENTER]-Select Menu
4� Restart the system and reinstall the system OS�
A-10
186.3GB
186.3GB
[
]
MAIN MENU
3. Reset Disks to Non-RAID
4. Exit
[ DISK/VOLUME INFORMATION ]
Non-RAID Disk
Non-RAID Disk
Advertisement
Table of Contents
